Doors Controller is an optimized solution for two-door gateways, perfectly suited for changing rooms, material gates (MAL), and personnel gates (PAL), where doors are often left open. Key Features: 1. Door Management: Supports manual swing and sliding doors, as well as pass-through gates with constant ventilation. 2. Compatibility: Can manage any fail-safe electric locks operating on 24 V DC. 3. Ease of Installation: Plug-and-play system ensures easy integration into two-door gateways. 4. Intelligent Logic: The microcontroller automatically activates room logic, blocking one door when the other is open. The controller offers four built-in logic modes that can be quickly configured using DIP switches on the board. 5. Anomaly Management: Includes alarms for an open door left ajar, forced opening, and simultaneous opening. 6. User Controls: The door unlock button is located on the door indicator panel. Additionally, a status indicator light for the door is also situated on the indicator panel. This solution ensures safety and convenience in various commercial and public settings.
The solenoid lock is used to lock the door. The rod extends when voltage is applied to the solenoid. The solenoid lock is designed for internal installation in the door frame. It consists of two parts: a solenoid lock with a built-in door status sensor and a strike plate with a magnet. The door status sensor is normally open (NO), i.e. when the strike plate with a magnet approaches it, the sensor closes; in the normal position, the door status sensor is open.
The membrane traffic light (narrow) is designed for mounting on the door frame profile. Mounting is done by gluing the membrane with the sticky side to the door frame. The flat membrane cable is connected to the adapter board using a 5-PIN connector, which has an RJ-45 connector for connecting to the controller.
The traffic light (narrow) is designed for mounting on the door frame profile. Mounting is done by screwing two screws to the door frame in a prepared niche in the profile. The traffic light is connected to the controller using a cable with an RJ-45 connector.
The traffic light membrane (wide) is designed for wall mounting. Installation is performed by gluing the membrane to the wall with the adhesive side. The membrane's flat cable is connected to the adapter board using a 5-PIN connector, which has an RJ-45 connector for connecting to the controller.
The expansion board is used to control sliding or roller doors. For example, Dortec or Tadiran. The board is connected to the controller by a cable with RJ-45 connectors.
The expansion board is used to control doors with an electromagnet. The board is connected to the controller via a cable with RJ-45 connectors.
